10K Skid Mounted Sand Separator

TSI Fabrication's Standard Sand Separator is the most commonly utilized sand separator in the field. Solids removal is accomplished by the gravitational method and centrifugal force. Well stream is directed to the top of the separator, and at the inlet the flow enters tangentially in to the separator thereby creating a centrifugal motion. Fluids then are directed towards the outlet located at the middle point of the vessel. The differential density among fluids causes solids to gravitate toward the wall and fall to the bottom of the vessel. The internal components eliminate remaining solids before fluid exits from the outlet nozzles. The bottom nozzle on the vessel can be connected to an adjustable choke and isolation valves. Using adjustable chokes well testing operators are able to drain accumulated solids at given time intervals depending on well sand production rate. For further details on available or customized Sand Separator Systems consult TSI Fabrication.



Notice: To view the three dimensional projects with zoom, pan, tilt, and rotate capabilities, only certain browsers are webGL enabled. Updated versions of Chrome and Mozilla are known to function properly.

Pan - Right Click and Hold Mouse Button
Orbit (Rotate/Tilt) - Left Click and Hold Mouse Button
Zoom - Mouse Wheel



Skid Mounted Sand Separator

Applications:

  • Frack flow back operations
  • Permanent production facilities
  • Production well testing operations


Features and Benefits:

  • Reduced damage to downstream equipment
  • Forged heads and shell
  • Clean-out nozzles
  • Relief valve nozzles
  • Double inlets
  • Trailer Mounted Sand Separator


    WORKING PRESSURE
    psi (bar)
    Vessel Size Vessel Length Inlet Size Sand Outlet Temp DIMS HxWxL FT (m) WEIGHT (Lbs/kg)
    5800
    (400)
    20"
    (50.8 cm)
    8 ft.
    (2.43 M)
    3" 1502 F 3" 1502 -20 to 255°F
    (-29 to 124°C)
    L-skid-4.5x4.5x14
    (1.37x1.37x4.27)
    6,700 / 3,040
    5800
    (400)
    20"
    (50.8 cm)
    8 ft.
    (2.43 M)
    3" 1502 F 3" 1502 -20 to 255°F
    (-29 to 124°C)
    Trailer-8x6x17
    (2.44x1.83x5.2)
    8,680 / 3,937
    10000
    (689)
    24"
    (50.8 cm)
    8 ft.
    (2.43 M)
    3-1/16" 10k Flange 2-9/16" 10k Flange -20 to 255°F
    (-29 to 124°C)
    L-skid-4.5x4.5x14
    (1.37x1.37x4.27)
    12,961 / 5,879
    10000
    (689)
    24"
    (50.8 cm)
    8 ft.
    (2.43 M)
    3-1/16" 10k Flange 2-9/16" 10k Flange -20 to 255°F
    (-29 to 124°C)
    Trailer-8x6x17
    (2.44x1.83x5.2)
    14,910 / 6,763
    CODES AND STANDARDS: ASME SEC. VIII DIV. 1, ASME B31.3, NACE MR0175